Off-Road Winch Bumpers for FJ Cruiser by Warn

To accommodate Toyota FJ Cruiser off-road enthusiasts who want a versatile front bumper with the ability to mount a winch, Warn Industries has released a front winch bumper application for use on this popular SUV. This durable unit has welded one-piece construction for excellent strength and minimal deflection under load, and an integral winch mount to accept WARN mid-frame winches (up to 12,000 lbs.). Other features include auxiliary light brackets to accommodate WARN lights (up to and including the SDB-210); an integrated guard for grille and headlamp protection; and lower fog lamp mounts, suitable for low-profile lamps. This bumper is powder-coated black with a wrinkle finish for good looks and outstanding durability. Like the front WARN Off-Road bumper, the Rear Off-Road Bumper is a one-piece design with welded eyelets to mount D-shackles, increasing your FJ's recovery options. Other features include a recessed center section allowing the factory tire carrier to hold up to a 33" tire, and the ability to mount the factory back-up sensors (if so equipped) and the factory receiver hitch. The bumper is covered in a black powder-coated wrinkle finish for good looks and outstanding durability. The SDB-210 Lights: The SDB-210HB uses a precision design Free Curve reflector that is outstandingly smooth and heat resistant. It reflects light efficiently due to the vaporized aluminum applied to the reflector surface. Aggressive off-road drivers will appreciate a lamp with a spot beam able to illuminate approximately 270 meters ahead, with a concentrated lighting pattern and a driving beam wide enough to supplement vehicle headlights by illuminating the entire surface in front of the vehicle. Hard off-road driving generates vibration and shock. The SDB-210HB has an internal light frame to protect the lamp and a stone guard to protect the lens. The body is constructed of a polycarbonate resin which has excellent impact resistance. Serious off-roaders usually run in serious weather. The SDB-210HB has weather resistant rubber seal to help protect the lamp integrity. The hardened glass lens gives excellent heat and thermal shock resistance, strength and translucency. The lamp illumination angle can be adjusted to 15 degrees up or down to fine-tune the light pattern. Dual beam control switch includes relay control feature and LED illumination when lamps are in use. SPECS ARE BELOW: Model: SDB-210HB Bulb: H4 Rating: 12V 100/90-Watt Maximum Brightness: 200,000CD Spot Beam: 853'/260m Driving Beam: 492'/150m Beam Color: White Lens Diameter: 7"/180mm Attachment Bolt Dimensions: 13/32"/10mm Switch: 1 (12V/24V) Relays: 2 Harness: 1 (H4 TYPE) Cord Clamps: 4 Relay Locating Clamp: 1 U-clip: 4 Clip tape 4 Self-tapping screw/washer: 2

Founded in 1948 by Arthur Warn, Warn Industries began producing locking hubs for surplus World War II Jeeps, converting thousands into useful, on-road vehicles. The WARN winch, developed in 1959, was the first recreational winch. With pioneering features such as a rugged drive train, the WARN winch quickly became the leading brand for off-road racers, avid four wheelers, weekend adventurers and hard working ranchers. Based in Clackamas, Oregon, today Warn Industries is the world's most recognized brand in off-road products. The company designs, manufactures and markets a full line of off-road equipment and accessories that enhance the performance of four-wheel-drive vehicles and ATVs. As well, the WARN industrial and military and WARN WorksTM (for utilitarian use) brands offer high-performance, quality products for today's hard worker.

Front Winch bumper is made to accommodate up to a 12K lb mid-frame winch.
Front winch bumper comes with handy auxilliary light brackets to accommodate Warn lights up to and including their SDB-210 series (sold seperately, below).
Front bumper also has an integrated guard to protect the center grille, as well as headlamps.
The rear bumper features welded eyelets to mount D-Shackles, increasing recovery options.
The rear bumper also has a recessed center section allowing the factory tire carrier to hold up to a 33" tire, and the ability to mount your factory optional backup sensors and hitch.
Both bumpers are a one-piece unit made of durable powder coated steel in a wrinkle finish for good looks.
The SDB-210 auxilliary lights are sold as a kit (Light Specs are above) and the light covers are optional (but recommended) and can be purchase individually. Dual beam control switch includes relay control feature and LED illumination when lamps are in use.

1. Bumpers are sold individually.
2. Lights are sold as a kit of 2.