Dodge Cummins Diesel Power Modules by Edge Products

The Dodge Cummins Diesel motor is one of the most powerful motors ever put in a pickup truck. Edge has a variety of products to unleash the potential of this monster delivering gains up to 120 horsepower and up to 350 foot pounds of torque. Edge CompThe Edge Comp module maximizes engine efficiency by monitoring the RPM, timing, turbo boost pressure and fueling parameters. The module uses this information to determine and control both fueling and timing enhancements for the Bosch fuel injection pump. Timing and fueling enhancements are controlled via CAN-BUS through the Data Link and by connecting directly into the Bosch fuel injection pump. The Edge Comp features five power levels with power gains from 40-120 horsepower. Each of the five power levels has an independent five-level adjustable responsiveness setting, providing for a total of 25 levels of adjustability! The responsiveness settings enable you to dial-in the optimum balance between responsiveness and low boost smoke control, no matter what additional power modifications have been made to the engine. The Comp module is fully adjustable on the fly and mounts inside the cab. CLICK TO SEE THE DYNO CHARTS

Sub-levels 1-3 on the Comp will provide de-fueling below stock. The de-fueling mode is entered only when rpm and boost are below a set value and stock fueling is being increased beyond a set rate. These conditions are different for each sub-level 1-3. During operation, when the de-fueling mode is entered, the rate of fueling increase is limited, which reduces smoke. De-fuel mode is exited once stock fueling equals the fueling controlled by the Comp. This way the transition is smooth and cannot be felt while driving. De-fuel mode is entered the easiest in sub-level 1 and has the smallest allowable fuel increase, while sub-level 3 de-fuel mode is not entered as easily and has a larger allowable fuel increase. Sub-levels 4 and 5 allow adjustment of the additional fueling above stock based on boost level. Sub-level 5 adds the most fuel at low boost; Sub-level 4, which adds less fuel than Sub-level 5, corresponds to jumper setting 2 on the EZ. The amount of additional fuel added is calculated, the amount actually added after being compared to boost from the total is as shown below:

• Sub level 1: 33% is added at 0 psi boost 100% is added at 20 psi boost
• Sub level 2: 50% is added at 0 psi boost 100% is added at 15 psi boost
• Sub level 3: 67% is added at 0 psi boost 100% is added at 10 psi boost

Fuel may be added at 0 psi boost on all Sub Levels and EZ Jumper settings unless the de-fuel mode is entered as described above. Power Level 1 on the Comp is the same as the EZ; on Power Levels 2-5 additional power is added via the wire tap onto the injection pump. If the pump wire is not attached with a Comp, Levels 2-5 are still operational, but the power gain is not any higher than Level 1. Under this scenario, however, power will come on much earlier in the throttle. NOTE: Legal in California only for racing vehicles which may never be used upon a highway. Edge EZ The Cummins motor is one of the most powerful motors ever put in a pickup truck. The Edge EZ module unleashes the potential of this monster by carefully monitoring RPM, turbo boost pressure and fueling parameters and adjusting fueling to maximize power, torque and driveability. The Edge EZ module allows maximum fueling at full turbo boost and provides an additional 65 rear wheel horsepower and an additional 150 foot pounds of torque. Simply plug the Power Edge EZ connectors into the ECM Data Link connection and MAP sensor. The Edge EZ is completely weatherproof and mounts under the hood. For 2004.5 and later trucks, the EZ has three levels of adjustability ranging from 25 to 65 additional horsepower. CLICK TO SEE THE DYNO CHARTS

The EZ can also be stacked with other upgrades to deliver even more power. There is not an upgrade on the market today that can deliver as much power and install so simply. Edge Juice with AttitudeThe Edge Juice/Attitude is a highly sophisticated package capable of dramatically improving your Cummins driveability, towing, mileage and, most importantly, POWER. Using factory-style connections in just ten minutes you can add five levels* of adjustable power ranging from 40 to 100 horsepower and increase torque up to 250 ft. lbs. The Juice greatly improves responsiveness and driveability, while at the same time increasing fuel economy. CLICK TO SEE THE DYNO CHARTS

When used in conjunction with the Attitude monitor you can control the five power levels on-the-fly from inside your truck. The Attitude displays all the information a complete set of gauges would and will automatically monitor and display exhaust gas temperature (EGT), turbo boost and transmission slip and de-fuel the engine to prevent excessive EGT, boost levels or transmission slippage. It also displays 0 60 times, quarter mile times and actual speed if you are using non-stock tires as well as a host of other parameters. The following power gains are representative of a 5.9 Dodge Cummins (600 Series) equipped with the Juice module and Attitude monitor:

• Level 0: Stock
• Level 1: 25 Horsepower - 80 Foot Pounds of Torque
• Level 2: 40 Horsepower - 120 Foot Pounds of Torque
• Level 3: 60 Horsepower - 150 Foot Pounds of Torque
• Level 4: 80 Horsepower - 200 Foot Pounds of Torque
• Level 5: 100 Horsepower - 250 Foot Pounds of Torque

Imagine, within minutes you get incredible power gains, an increase in mileage and the equivalent of a complete set of gauges with one simple installation! The Juice communicates directly with the engines ECM, from which it receives vital engine and fuel system information. This enables the Juice to provide smooth and precise power in real time under any driving condition. NOTE: Legal in California only for racing vehicles which may never be used upon a highway.

Attitude Controller Add-on
Adjustability has never been easier or looked better. The new in-cab controller combines sleek new engineering with cutting edge technology to provide state-of-the-art performance in adjusting levels, reading EGT and boost. With the addition of the controller, there will no longer be a need for gauges. With the backlit LCD display screen, EGT temperatures and boost readings will be displayed for easy and clear reading. With the push of the mode button, you can switch power levels and have adjustability on the fly.